Verilog Codes for different COUNTERS

Verilog code for a 4-bit unsigned up counter with asynchronous clear.

        module counter (clk, clr, q);
        input        clk, clr;
        output [3:0] q;
        reg    [3:0] tmp;
        always @(posedge clk or posedge clr)
        begin
           if (clr)
              tmp <= 4’b0000;
           else
              tmp <= tmp + 1’b1;
        end
           assign q = tmp;
        endmodule
        

Verilog code for a 4-bit unsigned down counter with synchronous set.

        module counter (clk, s, q);
        input        clk, s;
        output [3:0] q;
        reg    [3:0] tmp;
        always @(posedge clk)
        begin
           if (s)
              tmp <= 4’b1111;
           else
              tmp <= tmp - 1’b1;
        end
           assign q = tmp;
        endmodule
        

Verilog code for a 4-bit unsigned up counter with an asynchronous load from the primary input.

        module counter (clk, load, d, q);
        input        clk, load;
        input  [3:0] d;
        output [3:0] q;
        reg    [3:0] tmp;
        always @(posedge clk or posedge load)
        begin
           if (load)
              tmp <= d;
           else
              tmp <= tmp + 1’b1;
        end
           assign q = tmp;
        endmodule 
        

Verilog code for a 4-bit unsigned up counter with a synchronous load with a constant.

 module counter (clk, sload, q);
 input        clk, sload;
 output [3:0] q;
 reg    [3:0] tmp;
 always @(posedge clk)
 begin
    if (sload) 
              tmp <= 4’b1010;
    else 
       tmp <= tmp + 1’b1;
 end
    assign q = tmp;
        endmodule
        

Verilog code for a 4-bit unsigned up counter with an asynchronous clear and a clock enable.

 module counter (clk, clr, ce, q);
 input        clk, clr, ce;
 output [3:0] q;
 reg    [3:0] tmp;
 always @(posedge clk or posedge clr)
 begin
    if (clr)
       tmp <= 4’b0000;
    else if (ce)
       tmp <= tmp + 1’b1;
 end
    assign q = tmp;
        endmodule
        

Verilog code for a 4-bit unsigned up/down counter with an asynchronous clear.

 module counter (clk, clr, up_down, q);
 input        clk, clr, up_down;
 output [3:0] q;
 reg    [3:0] tmp;
 always @(posedge clk or posedge clr)
 begin
    if (clr)
       tmp <= 4’b0000;
    else if (up_down) 
       tmp <= tmp + 1’b1;
    else
       tmp <= tmp - 1’b1;
 end
    assign q = tmp;
        endmodule
        

e Verilog code for a 4-bit signed up counter with an asynchronous reset.

        module counter (clk, clr, q);
        input               clk, clr;
        output signed [3:0] q;
        reg    signed [3:0] tmp;
        always @ (posedge clk or posedge clr)
        begin
           if (clr)
              tmp <= 4’b0000;
           else
              tmp <= tmp + 1’b1;
        end
           assign q = tmp;
        endmodule
        

Verilog code for a 4-bit signed up counter with an asynchronous reset and a modulo maximum.

        module counter (clk, clr, q);
        parameter MAX_SQRT = 4, MAX = (MAX_SQRT*MAX_SQRT);
        input                 clk, clr;
        output [MAX_SQRT-1:0] q;
        reg    [MAX_SQRT-1:0] cnt;
        always @ (posedge clk or posedge clr)
        begin
           if (clr)
              cnt <= 0;
           else
              cnt <= (cnt + 1) %MAX;
        end
           assign q = cnt;
        endmodule