Digital questions-2

	A 0.01-F capacitor is recommended by TTL manufacturers for ________ the power supply.
	A. decoupling B. filtering C. rectifying D. grounding

---

7.	Why does the data sheet for the 7476 only give a minimum value for the clock pulse width (both HIGH and LOW)?
	A. nominal value B. best-case condition C. worst-case condition

---

8.	Why is the Schmitt trigger needed in the 60-Hz TTL-level clock pulse generator?
	A. to provide a triangle wave B. to provide a sine wave C. to provide a rounded pulse waveform D. to provide a sharp pulse waveform

---

9.	The main concern when using a pull-down resistor is:
	A. the low power dissipation of the resistor B. it will keep a floating terminal LOW C. the high power dissipation of the resistor D. it will cause false triggering

---

10.	Look up the propagation delay from the clock to the output for the 7476. Are the HIGH-to-LOW and LOW-to-HIGH propagation delays the same?
	A. yes B. no, tPLH = 25 ns, tPHL = 40 ns C. no, tPLH = 40 ns, tPHL = 25 ns D. no, tPHL = 25 ns, tPLH = 40 ns